Item	Unit	Value	Test Method
Thickness	mm	0.50mm +/- 10% Silicone Foam t=0.45mm, PET t=0.05mm	ASTM D3574
Density	g/cm3	0.39	ASTM D3574
CFD (25%)	Kgf/cm2	0.43	ASTM D3574
CFD (50%)	Kgf/cm2	1.08	ASTM D3574
Compression Set (50%@70 °C & 22hrs)	%	-	ASTM D3574
Max. Strain	%	69.4	ASTM D3574
Elastic Modulus	kgf/cm2	0.8	ASTM D3574
Energy Absorption (load & unload 100kgf@8mm/min)	%	28.9	ASTM D3574
Hardness	Shore "OO"	85	ASTM D2240
Standard Color		White	Visual
Flame Resistance	UL94	V0	KCC QMFZ8.E53047 SS7973A
Smoke Density		<50	After 4.0 min.
Smoke Density		<25	After 2.0 min.
Toxic Gas Emissions		PASS	SMP-800C
Water Absorption	%	4	Internal 24 hrs. room temp.
UV Resistance		No. Degradation	SAE J-1960
Dielectric Constant		1.4	ASTM D 150
Dielectric Strength		89	ASTM D 149
Volume Resistivity	Ω ,cm	10	ASTM D 257
Thermal Conductivity	W/m °K	0.4	ASTM C 518
Low Temperature flex at -55 °C		PASS	ASTM D 1056
Recommended use temperature	°C	-55 ~ 200	SAE J-2236
Recommended intermittent high temperature use	°C	250	Internal Test

All information and recommendations are given by us in good faith, on the basis of practical experience, but without warranty. It's essential that theuser should evaluate the product for a period of time to determine whether it is fit for a particular purpose and suitable for the user's method of application.